DIY wall panelling – a simple guide to creating your own wall panels


Having wall panels fitted professionally is very expensive and you can save yourself a pretty penny by creating them yourself. chatted to the owner of home staging company Lemon and Lime Interiors, Elaine Penhaul, and the experts at Richard Burbidge to find out how to create your own wall panels.

Wall panelling suits a number of different styles, from country houses to city apartments.

Previously, wall panelling was associated with old fashioned stately homes and traditional libraries and other institutions, but wall panelling is having a resurgence.

Panelling adds character and warmth to a room while making a large space feel cosier and a small room feel more spacious.

This style has a transformative effect by creating an illusion of depth, height and character.

The experts at Richard Burbidge said: “Due to the rise in demand for affordable panelling and feature walls, manufacturing methods have changed, along with the price point.

“Gone are the days when the only option was to rely on a skilled joiner. Nowadays, with competent DIY skills and tools, it is simple to quickly and effectively install panelling by yourself.”

Elaine Penhaul, author of Amazon bestseller ‘Sell High, Sell Fast: How to sell your home for the best possible price’ said: “There are lots of different types of wall panels that vary between covering the whole wall to only part of it.”

Here are four different ways to create your own wall panels, according to Elaine.

READ MORE-  How to clean walls without removing paint – GENIUS tip to clean walls

Vertical slat panelling

Vertical slat panelling is another popular option that is easy to fit, it just leaves you with a different look from the typical panelled walls most people are showing off on social media recently.

Elaine said: “You can fit vertical slat panelling by buying eight-foot by two-inch standard timber strips and fixing them to the wall at both the top and bottom of the panels.

“As with any DIY task, remember to always measure carefully and mark out these measurements on the wall before starting to permanently fixing your panels.

“If you want to go for a polished, painted look then make sure you paint the panels before fixing them – you can create a great 3D effect by painting a different colour on the wall than on the wood.”


If the panelling isn’t something you’re set on or you have little faith in your DIY skills, you might like to try something more temporary.

Elaine said: “You can create a French cleat fixing along the top of the existing wall and securing the panels together on the back before putting a simple fixing into the skirting at the base.

“This technique is quick and effective if you’re looking for a short-term alternative.”

9 headboards for an easy and stylish bedroom makeover [INFORMER]
Feng shui: How to organise your home [INSIGHT]
How to clean tarnished copper pans using ketchup cleaning hack [EXPLAINER]

How to create wall panels

Richard Burbidge, along with other DIY stores near you, offers an extensive variety of high-quality mouldings that can transform the look and feel of any room.

The experts at Richard Burbidge have explained exactly how to create your own wall panels in five steps.

Step one

Planning and measuring are very important when it comes to creating your own panels.

Firstly, you will need to measure the walls every length and width, making a note of any fittings you will need to avoid.

Draw your design with the measurements on some paper, making sure to plan an equal gap horizontally and vertically.

The experts said: “Transfer your measurements and plan to the wall, using a pencil, tape measure and laser level mark where each panel piece will be, while bearing in mind the width of the panel.

“We also recommend removing skirting and architrave on the feature wall to achieve a professional finish.”

Step two

Choosing your moulding or ready-made panelling, such as the ones available at Richard Burbidge, is the next step.

No matter what aesthetic you’d like to achieve, the most important part of any wall panelling is the quality of its materials, the experts at the UK’s leading supplier of mouldings said.

Choose according to Elaine’s advice and what style you’re after, but remember that quality is important.

Step three

Next, it’s time to cut the panels to length using a saw and a mitre box at a 90-degree angle.

The experts at Richard Burbidge said: “Carefully cut the panels that will be horizontally placed according to the measurements.

“Repeat this process for all of the horizontal panels, then lightly sand the ends until smooth.”

Step four

Once you’ve cut the panels, you can start applying them to the wall with nails and adhesive for extra security and hold.

The experts at Richard Burbidge said: “When applying the panels to the wall, start with the vertical panels.

“Place your panel onto the marked wall, use a laser level to ensure the panel is straight, then apply strong hold adhesive to the back and apply to the wall.
Repeat this process for all panels.

“Ensure you use a pipe and cable detector before nailing or drilling into any walls. If you are unsure it is safe to nail into your wall, opt for a strong adhesive instead.

“Once you have applied the panels, use decorators caulk. To patch any gaps, cracks or holes, then sand prior to finishing.”

Step five

Finally, you can add your own creative flair to the panelling.

The experts at Richard Burbidge said: “The project can be customised to work with any décor and colour scheme.

“There are many different ways you add your own creative flair to this project.

“You can choose to paint the whole wall one colour, or you can use a few different paint colours, you can paint dots, stripes or squares, or even draw your own unique design to really make this wall the focal point of your home.”

Source link